Description
- 3×5
- Low cost
- Low Profile Complies with 1U Height Requirement
- Zero minimum load
- Class B Conducted EMI
- "Overvoltage and Short Circuit Protection"
| Entrance: | |
| AC Input Voltage Efficiency | 100 - 240V AC |
| AC Input Voltage Range | 90 - 264V AC |
| AC Input Frequency | 47 - 63Hz |
| Input Current | 1.5A max. load and 115V AC 0.75A max. load 230V AC |
| Leakage Current | 100uA max. 264VAC |
| Inrush Current | 30A - 1150V AC max. load 60A 230V AC max. load (Cold start environment 25°C) |
| Hold Time | 10mS typical max. 115VAC |
| Exit: | |
| Output Voltage | 12V DC |
| Max. Load | 3.75A |
| Fluctuation | 120mV |
| Adjustment (Line/Load) | ±2% |
| Productivity | 80% min. max. load 115V AC |
| High Voltage Protection | #ERROR! |
| Moisture | 95% out of 5 |
| Emission | FCC Class B EN55022 Class B |
| standards | EN55024 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-11 EN61000-3-2 EN61000-3-3 1998 Level 3 Level 2 Level 3 Level 3 Level 2 Harmonic Level A Flicker |
| Overcurrent Protection | automatic restart |
| Login Protection | Inline fuse and neutral |
| Environment: | |
| Working Temperature | 0 to 50°C |
| not working | -25 to +85°C |
| General : | |
| Insulation Resistance | 10M Ohm min., 500V DC Dielectric withstand (Hi-pot) Test |
| Input to Ground | 1600V AC 3 seconds, 10mA input to output: 4200V AC 3 seconds, 10mA |
| Key Frequency | 50K Hz typical MTBF (Full load and 110V AC, 25°C) >100K hours |
| Input Connector | Molex 09-51-4034 enclosure with Molex 08-50-0106 pins |
| DC Output Connector | Molex 26-03-4041 enclosure with Molex 08-50-0189 pins |
Reviews
Be the first to review this item
There are no reviews yet